Showing posts with label cable. Show all posts
Showing posts with label cable. Show all posts

Tuesday, February 20, 2018

12G cabling - test results and a video presentation

I presented a recent Tech Breakfast at Jigsaw24, Golden Square. Here I detail the tests we've done across four cable types and how they perform at twelve gigabits/sec (as per SMPTE 2082-1).
We've recently taken on Leader as a manufacturer of test sets and they excel in several areas - namely UHD/4K/HDR and 12G physical layer measurements. 

 all the specs for SMPTE 2082-1

I got through all the details in the video (below and on YouTube) but you can snag my results here - if you go into the 12G folder you can see the screen grabs for all the eye patterns - the filename number related to the test line in the PDF.  The Powerpoint presentation is in there too; but if you watch the video I cut all the slides full-screen as appropriate.


 The cable types are;

SD05 - Belden 1855; otherwise known as "Image 360"
SD10 - Belden 1694
SD50 - Belden 1505; otherwise known as "Image 1000"
SD73 - Belden 7731 - about the most ungainly cable you can crimp a BNC onto!


Tuesday, January 19, 2016

Audio over cat6a cable?

My podcast-partner in crime, the mighty Hugh Waters asked me how often I run audio signals over twisted-pair data cable in media facility builds. Has has a customer who is eager to do it this way.

I’ve done it a few times and it’s fine with a few considerations.

  1. Earthing is still important and since IT people have no idea about proper grounding it can be an issue. If it’s a cat6a install in a TV facility done by me I’d have no worries, but the average IT install might have issues. But as four twisted pairs with individual screens cat6a is ideal for audio. It’s the other parts of the facility I’d worry about,
  2. RJ45s don’t have the same DC/LF performance as a good old B-gauge (or Bantam) connector; if the circuits are going to be patched often I’d be wary – mechanically they aren’t great next to traditional audio connectors, 
  3. From a wiring perspective; how do you nicely terminate into XLRs from a piece of cat6a?
  4. Track shuffling is hard,
  5. AES – just fine. Cat6a has an impedance of ~100Ω per pair, ideal for twisted-pair AES. Same observations as 1, 2 & 3.

There you go. I did work at one facility where the engineer had got obsessed with structured cabling and did everything he could over cat6 – analogue video (via baluns), audio, RS422 etc. He liked the idea that you could patch an offline i/o with two RJ45s (stereo i/o on one and video i/o and remote on the other). It didn’t work well and I put in proper cabling and patching after a year.

Sometimes convenience blinds you to fitness for purpose.

Thursday, December 10, 2015

4k and UHD cabling and signal standards

I've had to dig into signal transport for 4k/UHD over the last week or so. Essentially I have a test-signal generator (SRI Visualizer TG100) running at a maximum raster of 4096x2160 at a maximum of 25 progressive frames/sec (and only 4:2:2 colour sampling; Y, Cr, Cb) with a 6G single-link output (so really 4 x 1.5G links) and HDMI 1.4 (so the same raster as the SDi). The monitors are the 24" and 30" Canon IPS 4k native monitors.
The Canon monitors will take quad-link HD/SDi and (in the case of the 24") HDMI. So, feeding the SRI single-link into a Blackmagic 4k multiplex (to produce quad-link) and then into the Canon produces four quads in the wrong colour-space!


 For an insight into what the multiplex is doing it's worth looking at the two standards for quad-link SDi. Put aside if it's 4 x 1.5G or 4 x 3G (that allows an increase to 50 or 60P OR 4:4:4 colour). But, in this case we're de-mux'ing a 6G to 4 x 1.5G signals. 

The original 4k-over-four-BNCs standard


The more recent standard; each link looks like an HD version

Clearly the converter is producing 2SI but the Canon expects SD quad-link. In fact the guys at Canon tell me they have a firmware update early in 2016 to address this. The other error is that the Canon has mistaken the 4:2:2 video as RGB - but it has at least got the raster correct.
So, what to do? Well, by throwing in another converter and taking the HDMI out of the SRI means the BM mux will get an older SD quad-link input;


This produced what we need; clearly HDMI has not concept of mutliplexed pixels and so we're now fully in SD quad-link;

tugging BNC no.4 shows the monitor is now in quad mode

The monitor gets it all right

The other thing that you have to pay attention to in "True 4k" displays (for the film snobs!) is that feeding 3840x2160 signal into a 4096x2160 monitor and letting the monitor scale-up to fill the line risks killing your resolution;
The aliasing should only the present in the top-most block, the other alias frequencies you can see here are due to my iPhone's camera!

Some very strange aliasing when a 3840-pixel line is mapped to 4096 pixels

As ever with display devices, pixel-pixel (native resolution) is always preferred