Antrica video-over-IP encoder/decoders

Every TV industry magazine is currently honor-bound to run a "video-over-IP will replace baseband this year" article at least once every three months. Despite the attraction of sending video over networks there are fundamental problems related not to the fact that it's a network (but, then again TCP/IP was never meant for synchronous, timely delivery of data) but rather the compression used. Actually, not the compression (after all MPEG4 v.10 variants; H.264, AVC etc are pretty good) but the latency; for long-GOP material 12-frames encode is not unusual.

I was pleased to get my hands on a couple of Antrica 32000-series encoder/decoder units. These are HD/SDi and HDMI i/o and you can configure each to be either an encoder or decoder. They are clearly based on a security camera chipset (all the Pan-Tilt-Zoom controls are grey'ed out!) but they have some very nice features;

• The outputs remain live when one is being used as an encoder so you can get a feel for what the untransmitted pictures look like (it isn't just a loop-through of the input HD/SDi). 
• They have up and down converters and so a 1080i input signal can be sent at 720P and an incoming 720P stream can be displayed at 1080i (or SD, for example).
• They have three streaming modes; their own single-port over TCP mode that streams macro-blocks and hence gives incredibly short latency; 80mS at best but more likely 200mS. A buffer at the receiver end can be wound-out to smooth the spikiness of the data rate (with the worsening of the latency). If that isn't working the units fall back to RTSP over TCP or UDP and finally if all else fails MPEG Transport Stream over TCP.
• They also do a software video-wall that will receive a dozen streams.

So, proof of the pudding and all that. I made a 1080i sequence of static frames with resolution gratings and so moving stuff. At only 2MBits/sec (which is allowed to spike-up to 3MBits/sec) I was impressed. Here is BBC HD Test-Card F straight into the monitor and then via the system;

 

The aliasing you can see on the lower gratings is from my iPhone's camera - you really can resolve them to the 15Mhz grating, so no resolution is seemingly being lost.

 These two are taken from the Belle Nuit Montage test chart which shows up all sorts of problems with resolution, colour-space and levels. The finest grating is not resolvable in 4:2:2 encoded material and so what you're seeing here is in part an artifact of the sampling structure of 1.5GBit video.

This is a screen-grab from my trusty Tektronix WFM7100 - I've parked the line-selector on that final grating and zoomed in so that we're looking at 300nS/div on the horizontal. The waveform has been faithfully reproduced with only a low-frequency (I estimate 2Mhz) harmonic. I initially thought this was a fault in the optical transfer function of the monitor but it's there on the signal.

I was playing off my laptop via a Black Magic UltraStudio Express. If you want to play with the clip I've stuck it in my useful clips folder on Google Drive (there is also so DolbyE material in there). It's also worth mentioning they have a software tool for monitoring their end-points. It's called True Manager can as well as allowing you to tweak settings etc you can also monitor in realtime the bandwidth used. This is all very encouraging as tomorrow I will stick an encoder in Root6's office and see what sort of performance I get across the public Internet. As ever with these systems they are adaptive and for still frames they settle at a very low data rate, but at scene changes the system seems to spike to around 50% bandwidth than I'd configured. BUT, the fact remains, I *seem* to be seeing very nice looking 1080i pictures over a few MBits/sec!